Recumbent Cargo Bike 3

Recumbent Cargo Bike 3

Finally found my seat: an old office chair! I cut the legs off and welded on a bicycle seat post. At first it was able to recline back, but that feature proved to make the bicycle unrideable because the seat would recline if even the smallest force was applied to the pedals…

Maximum style points, if you will:

I had to weld on the handlebars because there was just not enough room for a stem… Hopefully the bars never bend!

To attach the ball joints for the steering linkage, I welded bolts to the bars and the fork:

Finally finished with fabrication!

Time to paint!

Most of my welds looked decent after a good painting!

 The final product! With chains, components, cargo bay wrapping, and all! Nessy rides surprisingly well. It is a little difficult to get going because of the nature of a recumbent, but once moving, she hanndles well at slower than walking speeds and at high cruising speeds. The steering is responsive and there doesn’t seem to be any noticeable play in the remote steering. The chair is like a dream. Once going, you just slump back and sink in. You let your arms dangle at the bars and just cruise around.